BillFitzmaurice.info

I have a line on some reclaimed wood that for the sake of discussion I can get cut down to 3/4" x 8" x 24" and I might want to cut those down further to 3/4" x 2" x 24" and join them to make whatever depth I want. I've made an XF210 out of 3/4" plywood and am very ...

This suggestion does not connect firmly to the issue of cabinet depth but if you are building this open-back, let me suggest that you make more than one top back board in different heights. I have my speaker jack set into the back of the top board which makes it a little less easy of a swap but if y...

I don't know what the OmniTop 15 is like so I don't have enough info to quite address your question. Sounds like the "internal" (internal to the cab?) crossover *is* the passive one, so I don't understand what you're asking there. I also don't know if your dBx active crossover is three-way...

Thank you so much! Great job on the cab BTW.

Anyone have photos that show what the XF410 or especially the XF412 cabs look like?

I am currently working on completing my XF212 and have a question regarding the mounting of the speakers on the baffles. There is little room around the cutout to mount the spiked 1/4-20 T-Nuts I have. The speaker mounting holes to the edge are .25"-.375"on the Fender (Eminence) speakers....

I have an abundance of 12" Poplar board that I joined 15 years ago that is 20" wide. Joints are solid and joined properly with any warping. Is there any reason, other than a potential weight difference, that I can't use this to build my cabinet? I would still use plywood for the speaker b...