BillFitzmaurice.info

I use one for panel one installation. especially if it's a wide cab. I leave in it place while I install 2. Just be sure to fill the screw holes when you pull it. Thanks Leland, is it really ok to put many holes on the panel,on the main side plus the jig and fill it later? i am asking because i nev...

Fastening always refers to a permanent joint between parts. Jigs are not permanent. They're removed as soon as the joint between the two parts has been fastened. Use a framing square to draw the joints with panels 2 and 4 onto panel 1. Screw the 2 degree edge scrap to the joint of panel 2 with pane...

The plan recommend screw is 1 1/4" and recommended flat jig is 2" . How do this work for example in the panel 1 installation. if i drill from the jig to the panel it wont reach right? The jig is 1/2 inch thick. That leaves 3/4 inch of screw to penetrate the panels. Ok, thank you , i under...

Clamps and triangle jigs work fine at the outside corners, but they won't give perfect joints across the cab the way the jigs shown in the plans do. The plan recommend screw is 1 1/4" and recommended flat jig is 2" . How do this work for example in the panel 1 installation. if i drill fro...