Search found 7 matches
- Sun Oct 20, 2019 4:08 pm
- Forum: Build Threads
- Topic: metal grille rubber edging
- Replies: 2
- Views: 707
Re: metal grille rubber edging
Thanks Nuke Pooch , appreciate it !
- Sun Oct 20, 2019 9:45 am
- Forum: Build Threads
- Topic: metal grille rubber edging
- Replies: 2
- Views: 707
metal grille rubber edging
Anyone have a source for these slotted rubber mouldings to install on the metal grille edges ?
I read someone got theirs at a auto body supply shop.
I'll head to NAPA tomorrow to see if they might have something suitable there .
I read someone got theirs at a auto body supply shop.
I'll head to NAPA tomorrow to see if they might have something suitable there .
- Mon Oct 07, 2019 3:17 pm
- Forum: Tips, Techniques and Supplier Links
- Topic: rubber feet for metal grille standoff.
- Replies: 0
- Views: 9286
rubber feet for metal grille standoff.
I will be installing the metal grille on my Simplexx 110 and will be using the square sheet .
I won't be trimming off the metal area over the corner ports .
Any tips on which size rubber feet and how many to use on the baffle as standoffs ?
thanks
I won't be trimming off the metal area over the corner ports .
Any tips on which size rubber feet and how many to use on the baffle as standoffs ?
thanks
- Mon Oct 07, 2019 3:14 pm
- Forum: Build Threads
- Topic: Roundover tearout repair ?
- Replies: 13
- Views: 1681
Re: Roundover tearout repair ?
I did get the regular Bondo body filler at AutoZone $13 in stock , Home Depot was $8 , .....but out of stock .
AutoZone here also carries the Bondo in a tube , good to know
Thanks for your help everyone , my first experience with Bondo and it worked great
AutoZone here also carries the Bondo in a tube , good to know
Thanks for your help everyone , my first experience with Bondo and it worked great
- Fri Oct 04, 2019 4:41 pm
- Forum: Build Threads
- Topic: Roundover tearout repair ?
- Replies: 13
- Views: 1681
Re: Roundover tearout repair ?
Thanks everyone , I went to HD today but they were out of regular Bondo, so I'm off to NAPA or Lowe's tomorrow . Autozone's web site shows most Bondo no longer available so I'm not going to drive there . Seth, thanks for the tip on the rasp . I still have my father's rasp he gifted me long ago to us...
- Tue Oct 01, 2019 2:07 pm
- Forum: Build Threads
- Topic: Roundover tearout repair ?
- Replies: 13
- Views: 1681
Re: Roundover tearout repair ?
Thanks for posting your responses Bill and Seth .
Do you just buy Bondo at an Auto Supply , or is Home Depot a better bet ?
Do you just buy Bondo at an Auto Supply , or is Home Depot a better bet ?
- Tue Oct 01, 2019 11:36 am
- Forum: Build Threads
- Topic: Roundover tearout repair ?
- Replies: 13
- Views: 1681
Roundover tearout repair ?
Yesterday I used my router trim bit on my Simplexx 10 cabinet to clean up the edge joints and then used a 3/8th's inch round-over bit . All went until the very last round-over on the rear bottom of the back and there is tear out on the top ply splintering off in a big zig zag pattern on the lower re...