Search found 11 matches

by KR500
Fri Nov 08, 2019 7:04 pm
Forum: Simplexx
Topic: Eminence driver for Simplexx 10 cabinet
Replies: 9
Views: 1191

Re: Eminence driver for Simplexx 10 cabinet

There was some mismatch going on with my TubeWorks tube amp and a Tube compressor I was using . The Tube compressor works great in front of my Combo Ampeg, but not the TW amp . Plus there is no active/ passive pad on the amp and it weighs 38 pounds anyway . Just got a TC Electronics 250 amp head tod...
by KR500
Sun Oct 20, 2019 4:08 pm
Forum: Build Threads
Topic: metal grille rubber edging
Replies: 2
Views: 275

Re: metal grille rubber edging

Thanks Nuke Pooch , appreciate it !
by KR500
Sun Oct 20, 2019 9:45 am
Forum: Build Threads
Topic: metal grille rubber edging
Replies: 2
Views: 275

metal grille rubber edging

Anyone have a source for these slotted rubber mouldings to install on the metal grille edges ?
I read someone got theirs at a auto body supply shop.
I'll head to NAPA tomorrow to see if they might have something suitable there .
by KR500
Sun Oct 20, 2019 9:42 am
Forum: Simplexx
Topic: Eminence driver for Simplexx 10 cabinet
Replies: 9
Views: 1191

Re: Eminence driver for Simplexx 10 cabinet

I installed a new Eminence S2010 from US Speaker to my completed Simplexx 10 and plugged it in a Tube Works 60 amp head ( 2 6L6 power tubes ) . Previously I used the TW amp with a 1.5 cu. ft cabinet loaded with the Eminence CH2010 and it sounded great, although I never turned the volume up much . Wo...
by KR500
Mon Oct 07, 2019 3:17 pm
Forum: Tips, Techniques and Supplier Links
Topic: rubber feet for metal grille standoff.
Replies: 0
Views: 619

rubber feet for metal grille standoff.

I will be installing the metal grille on my Simplexx 110 and will be using the square sheet .
I won't be trimming off the metal area over the corner ports .
Any tips on which size rubber feet and how many to use on the baffle as standoffs ?

thanks
by KR500
Mon Oct 07, 2019 3:14 pm
Forum: Build Threads
Topic: Roundover tearout repair ?
Replies: 13
Views: 644

Re: Roundover tearout repair ?

I did get the regular Bondo body filler at AutoZone $13 in stock , Home Depot was $8 , .....but out of stock .
AutoZone here also carries the Bondo in a tube , good to know
Thanks for your help everyone , my first experience with Bondo and it worked great
by KR500
Fri Oct 04, 2019 4:41 pm
Forum: Build Threads
Topic: Roundover tearout repair ?
Replies: 13
Views: 644

Re: Roundover tearout repair ?

Thanks everyone , I went to HD today but they were out of regular Bondo, so I'm off to NAPA or Lowe's tomorrow . Autozone's web site shows most Bondo no longer available so I'm not going to drive there . Seth, thanks for the tip on the rasp . I still have my father's rasp he gifted me long ago to us...
by KR500
Tue Oct 01, 2019 2:07 pm
Forum: Build Threads
Topic: Roundover tearout repair ?
Replies: 13
Views: 644

Re: Roundover tearout repair ?

Thanks for posting your responses Bill and Seth .
Do you just buy Bondo at an Auto Supply , or is Home Depot a better bet ?
IMGP1632.jpg
IMGP1632.jpg (66.14 KiB) Viewed 611 times
IMGP1633.jpg
IMGP1633.jpg (72.71 KiB) Viewed 611 times
by KR500
Tue Oct 01, 2019 11:36 am
Forum: Build Threads
Topic: Roundover tearout repair ?
Replies: 13
Views: 644

Roundover tearout repair ?

Yesterday I used my router trim bit on my Simplexx 10 cabinet to clean up the edge joints and then used a 3/8th's inch round-over bit . All went until the very last round-over on the rear bottom of the back and there is tear out on the top ply splintering off in a big zig zag pattern on the lower re...
by KR500
Sun Jul 14, 2019 3:27 pm
Forum: Simplexx
Topic: Eminence driver for Simplexx 10 cabinet
Replies: 9
Views: 1191

Re: Eminence driver for Simplexx 10 cabinet

Okay , thanks for your response , looks like I'm looking for a new Eminence . I use an Electric Acoustic Bass guitar with flat wounds and tube compressor playing with one or 2 amplified acoustic musicians . In other words no more high volume gigs since I'm 68 now . No more SVT either, but I was an A...
by KR500
Sun Jul 14, 2019 1:02 pm
Forum: Simplexx
Topic: Eminence driver for Simplexx 10 cabinet
Replies: 9
Views: 1191

Eminence driver for Simplexx 10 cabinet

I looked through the FAQ and searched the forum but didn't see if the driver I own is going to be a recommended one for the Simplexx 1X10 cabinet ? I was going to order the cabinet from Speaker Hardware and didn't see it as one of the listed drivers at their site . Eminence discontinued it for some ...