BillFitzmaurice.info

It’s done!! Sounds great! I’ll have to play around with EQ, etc, to figure out it’s tonal spectrum. Right now I’m running it through a TC HyperGravity compression pedal and a new Fender Rumble 200. So I’ve got a lot to familiarize myself with.

Thanks all for the kind words. Of course all I see is what I could’ve done better :/. With that in mind, here is what I would’ve done differently: _ I could not get the cane grille cloth to stretch evenly so there are ripples where the material covers the large open spaces. Thankfully the black colo...

Though not yet functional, it at least looks the part!

The crossovers. I mounted the component caps & coils to one side of 1/4” ply with hot melt glue and a few zip ties. I then did the wiring from the back in slots I routed with a Dremel. Lastly, I potted the wiring with hot melt glue to provide some electrical insulation (actually to hide my nasty...

Here’s photos of the mid-range horn. The horn was mounted to the front baffle by setting it in place then surrounding the horn with 1/2” blocking to form a routing template. After removing most of the waste with a jigsaw, the balance was removed with a top bearing router bit, leaving a very professi...

Here are photos of the cabinet in the early stages of assembly.

I decided on a 2x10 build as overall efficiency is supposed to be better. I decided on the standard over the tall boy because of height constraints in my practice/storage room ( needs to fit under a built-in desk. The cab is going to be very Orange OBC’esque, as I just like the look. The series of p...