TITAN48'S CORNER LOADED

Post links to youtube videos of your cabs.
Forum rules
Only links to videos of our cabs are allowed. You tube only, no facebook.
Post Reply
Message
Author
User avatar
on1sony
Posts: 145
Joined: Tue Dec 01, 2009 12:03 am
Location: Southern California
Contact:

TITAN48'S CORNER LOADED

#1 Post by on1sony »

6xBFM TUBA60 30" WIDE
4xBFM DR280's
4xQSC PL325 AMPS
DBX PA+
2xQSC K12 Monitors
AutoTuba 10" Driver (Building Soon)

User avatar
loudsubz
Posts: 390
Joined: Tue Dec 28, 2010 8:13 pm
Location: Mississauga, Ontario, Canada

Re: TITAN48'S CORNER LOADED

#2 Post by loudsubz »

i like the pink BBE DS :)

bradn7
Posts: 82
Joined: Tue Jul 12, 2011 12:49 pm
Location: Concordia, KS, USA

Re: TITAN48'S CORNER LOADED

#3 Post by bradn7 »

are you powering that with a QSC 2450 RMX? I ask because I want to make sure that my amp will be able to power them easily.

Grant Bunter
Posts: 6915
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: TITAN48'S CORNER LOADED

#4 Post by Grant Bunter »

bradn7 wrote:are you powering that with a QSC 2450 RMX? I ask because I want to make sure that my amp will be able to power them easily.
I'm not sure that the OP will be able to answer you.
I think he is no longer a forum member...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: TITAN48'S CORNER LOADED

#5 Post by Bruce Weldy »

bradn7 wrote:are you powering that with a QSC 2450 RMX? I ask because I want to make sure that my amp will be able to power them easily.
Here's how you do it.

1. Google QSC RMX2450
2. Follow a link and find out it's wattage rating at either 8 or 4 ohms - whichever you are going to be hanging on it.
3. Go here: http://www.sengpielaudio.com/calculator-ohm.htm
4. Put in the ohms and the wattage. It will tell you the voltage output. If that is more than the plans call for as the voltage limit - you are good to go.....with your limiter hooked up, of course.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

bradn7
Posts: 82
Joined: Tue Jul 12, 2011 12:49 pm
Location: Concordia, KS, USA

Re: TITAN48'S CORNER LOADED

#6 Post by bradn7 »

Thank you for that page.

User avatar
escapemcp
Posts: 1219
Joined: Thu Feb 07, 2013 8:57 pm
Location: Bristol, UK

Re: TITAN48'S CORNER LOADED

#7 Post by escapemcp »

Grant Bunter wrote:I'm not sure that the OP will be able to answer you.
I think he is no longer a forum member...
So it FINALLY happened then???
(Sorry guys, out of the loop as I have been away for a few weeks (new job(=new speakers ;))))

Michael Murphy
Posts: 343
Joined: Sun Dec 30, 2012 2:17 pm
Location: Trinidad

Re: TITAN48'S CORNER LOADED

#8 Post by Michael Murphy »

I think it was just a ban.

Post Reply