Add it again...T30's at 21"

Post your build odyssey here.
Message
Author
chrisj360
Posts: 114
Joined: Fri Sep 20, 2013 1:37 pm
Location: Bellingham, WA

Add it again...T30's at 21"

#1 Post by chrisj360 »

Hello everyone...it's been a bit. Hope everyone has been well. It looks like it from the posts.

Started building my second round of T30's that will be a bit smaller than my original 28" ones. This pair will be at 21 inches to better fit in my car. Putting matching Lab12's in them. Can't wait for the drivers to arrive...

Cheers and have a great day!
IMG_1989.jpg
IMG_1993.jpg
IMG_1993.jpg (10.11 KiB) Viewed 2785 times
IMG_1994.jpg
IMG_1994.jpg (7.97 KiB) Viewed 2785 times
2 x 21" T30's with Lab12's
2 x 28" T30's with Lab12's
2 x OTop12 with Deltalite 2512

User avatar
Padde298
Posts: 115
Joined: Thu Jun 29, 2017 5:04 am
Location: Denmark

Re: Add it again...T30's at 21"

#2 Post by Padde298 »

:shock: :shock: :shock: :shock:
More bass, more bass! :chainsaw: :chainsaw:

2 x TAT

chrisj360
Posts: 114
Joined: Fri Sep 20, 2013 1:37 pm
Location: Bellingham, WA

Re: Add it again...T30's at 21"

#3 Post by chrisj360 »

Since we're back in monsoon season here in the PNW, here's my new tiny workshop:
IMG_1999.jpg
IMG_1999.jpg (9.67 KiB) Viewed 2719 times
IMG_2001.jpg
IMG_2001.jpg (9.91 KiB) Viewed 2719 times
I've made circles! Baffles are cut:
IMG_2002.jpg
IMG_2002.jpg (8.18 KiB) Viewed 2719 times
Spacers are next...
2 x 21" T30's with Lab12's
2 x 28" T30's with Lab12's
2 x OTop12 with Deltalite 2512

User avatar
Chris_Allen
Posts: 3355
Joined: Wed Jul 11, 2007 2:43 pm
Location: Huddersfield, UK

Re: Add it again...T30's at 21"

#4 Post by Chris_Allen »

All man caves start small.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10

chrisj360
Posts: 114
Joined: Fri Sep 20, 2013 1:37 pm
Location: Bellingham, WA

Re: Add it again...T30's at 21"

#5 Post by chrisj360 »

Not a super exciting update but one nonetheless. Since I cannot do more until the drivers arrive, I rough cut a handful of the other pieces.
IMG_2004.jpg
IMG_2004.jpg (8.54 KiB) Viewed 2654 times
Got thru a number of panels and some of the braces...

Cheers!
2 x 21" T30's with Lab12's
2 x 28" T30's with Lab12's
2 x OTop12 with Deltalite 2512

chrisj360
Posts: 114
Joined: Fri Sep 20, 2013 1:37 pm
Location: Bellingham, WA

Re: Add it again...T30's at 21"

#6 Post by chrisj360 »

Braces made...
IMG_2005.jpg
IMG_2005.jpg (8.55 KiB) Viewed 2549 times
IMG_2006.jpg
IMG_2006.jpg (8.5 KiB) Viewed 2549 times


Drivers arrived:
IMG_2012.jpg
IMG_2012.jpg (7.84 KiB) Viewed 2549 times
Baffle testing:
IMG_2018.jpg
IMG_2018.jpg (7.5 KiB) Viewed 2549 times
2 x 21" T30's with Lab12's
2 x 28" T30's with Lab12's
2 x OTop12 with Deltalite 2512

chrisj360
Posts: 114
Joined: Fri Sep 20, 2013 1:37 pm
Location: Bellingham, WA

Re: Add it again...T30's at 21"

#7 Post by chrisj360 »

The morning's progress. Time to walk my dog and let some PL harden up.
IMG_2025.jpg
IMG_2025.jpg (8.42 KiB) Viewed 2531 times
Definitely easier to do the Lab mods early rather than at the end like last time.

Side note, my measuring tape fell into an inter-dimensional hole and is missing. Been bugging me since yesterday...
2 x 21" T30's with Lab12's
2 x 28" T30's with Lab12's
2 x OTop12 with Deltalite 2512

chrisj360
Posts: 114
Joined: Fri Sep 20, 2013 1:37 pm
Location: Bellingham, WA

Re: Add it again...T30's at 21"

#8 Post by chrisj360 »

Called it a day with the Lab mod panels set. Anyone have any good tips for securing the angle braces? Every time I try and screw in (pre-drilled hole), it pushes it around. With the odd angle, haven't found a good way of clapping it.

Now wake up early before work and see what I can bang out.
IMG_2027.jpg
IMG_2027.jpg (8.34 KiB) Viewed 2523 times
IMG_2028.jpg
IMG_2028.jpg (8.55 KiB) Viewed 2523 times
2 x 21" T30's with Lab12's
2 x 28" T30's with Lab12's
2 x OTop12 with Deltalite 2512

User avatar
DJPhatman
Posts: 5412
Joined: Mon Aug 14, 2006 5:08 am
Location: Warren, MI
Contact:

Re: Add it again...T30's at 21"

#9 Post by DJPhatman »

chrisj360 wrote:Anyone have any good tips for securing the angle braces? Every time I try and screw in (pre-drilled hole), it pushes it around. With the odd angle, haven't found a good way of clapping it.
Brad nailer and a small "pancake" style air compressor. Practice on scraps first, until you get really comfortable using it. Shoot the brads in a "V" formation, or "\ /" or "/ \".
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice

chrisj360
Posts: 114
Joined: Fri Sep 20, 2013 1:37 pm
Location: Bellingham, WA

Re: Add it again...T30's at 21"

#10 Post by chrisj360 »

Thanks for the tip. However, until I either win the lotto or the tool gods gift me with a one, I am stuck doing with my screwdriver. Luckily with this build, I have a new tenant with some tools. Was able to borrow their screwdriver so I could have one for the screws and one for drilling the pilot holes. No more changing out the bit every time.

Small victories, right?
2 x 21" T30's with Lab12's
2 x 28" T30's with Lab12's
2 x OTop12 with Deltalite 2512

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: Add it again...T30's at 21"

#11 Post by Bill Fitzmaurice »

chrisj360 wrote:until I either win the lotto or the tool gods gift me with a one, I am stuck doing with my screwdriver.
A compressor and brad nailer won't set you back all that much, and a compressor has a dozen uses, not the least of which is saving you from having to drive around town looking for gas station that still has an air pump for your tires. For instance:
https://www.lowes.com/pd/Bostitch-6-Gal ... d/50396510

User avatar
Padde298
Posts: 115
Joined: Thu Jun 29, 2017 5:04 am
Location: Denmark

Re: Add it again...T30's at 21"

#12 Post by Padde298 »

DJPhatman wrote:
chrisj360 wrote:Anyone have any good tips for securing the angle braces? Every time I try and screw in (pre-drilled hole), it pushes it around. With the odd angle, haven't found a good way of clapping it.
Brad nailer and a small "pancake" style air compressor. Practice on scraps first, until you get really comfortable using it. Shoot the brads in a "V" formation, or "\ /" or "/ \".
+1 :clap:
More bass, more bass! :chainsaw: :chainsaw:

2 x TAT

Think
Posts: 117
Joined: Tue May 09, 2017 5:37 pm
Location: The Neterlands / Holland
Contact:

Re: Add it again...T30's at 21"

#13 Post by Think »

Are the electric nailers/tackers any good? In reviews I read that they lack power, but they might be powerfull enough/fine for this job.
Has anyone experience with them?

You can use a compressor with a paint bucket to spray paint, dust off electronics and others and many more uses.
To inflate a car tire you can also use a bicycle pump; mountain bikes use the same valves as cars.

chrisj360
Posts: 114
Joined: Fri Sep 20, 2013 1:37 pm
Location: Bellingham, WA

Re: Add it again...T30's at 21"

#14 Post by chrisj360 »

Thanks for the suggestions. I'll keep in mind for the future when I've got some extra cash or I think I know of a place where I could rent one for a couple days. For this build, I'll have to keep trucking with the screw gun.
2 x 21" T30's with Lab12's
2 x 28" T30's with Lab12's
2 x OTop12 with Deltalite 2512

chrisj360
Posts: 114
Joined: Fri Sep 20, 2013 1:37 pm
Location: Bellingham, WA

Re: Add it again...T30's at 21"

#15 Post by chrisj360 »

Was hoping to get both the side panels on yesterday but only managed to get to basically panel 10 on both.

I really hate the braces. I don't know what I am doing wrong but I rough cut them per the plans and then on both builds feel like I spend more time either re-cutting/kerfing/sanding them than any other part of the build. I know it's due to an earlier combination of panels coming together (chickens coming home to roost...) but everything seemed like the plans were being followed and going smoothly with panels 1-5.

When building two at a time, has anyone else noticed that one box everything seems to go fine with and the other is like a needy child demanding twice as much attention? Again, I know it's a culmination of minor missteps that lead up to something being out of square or braces re-done, but holy moly.

I did catch (too late though) that I did screw on panel six wrong (to the bottom of panel 4 instead of flush...not quite sure if that describes it proper), however the only thing it seemed to affect is not having the extra to cut off of panel seven at the top. Fingers crossed...
IMG_2038.jpg
IMG_2038.jpg (14.05 KiB) Viewed 2387 times
IMG_2039.jpg
IMG_2039.jpg (13.62 KiB) Viewed 2387 times
IMG_2041.jpg
IMG_2041.jpg (13.42 KiB) Viewed 2387 times
2 x 21" T30's with Lab12's
2 x 28" T30's with Lab12's
2 x OTop12 with Deltalite 2512

Post Reply