About 320cmHow far is the mic from the THT?
36" THT Low Profile, Warning lots of coffin pictures
Re: 36" THT Low Profile, Warning lots of coffin pictures
Re: 36" THT Low Profile, Warning lots of coffin pictures
Good job. You sure smoothed it out. Some times you may find that an RCA crossover like Harrison
Labs 100 Hz or 140 Hz low pass filter x2 will take out some flappyness. If the horn is doing overtime by working above 150hz that would be noticeable front corner or wherever you permanently installed it. You don't want to be able to pinpoint where the sub bass is coming from.
Awesome build !
Labs 100 Hz or 140 Hz low pass filter x2 will take out some flappyness. If the horn is doing overtime by working above 150hz that would be noticeable front corner or wherever you permanently installed it. You don't want to be able to pinpoint where the sub bass is coming from.
Awesome build !
Defy the vortex -of mediocre-second rate bass- produced by mongrels- devoid of taste!
A beautiful lyric from : Maggotron "In Search of a Funky Khan"
4 T60 27" lab15,Omni TB 2 BP102,AutoTubaMCM 10"
A beautiful lyric from : Maggotron "In Search of a Funky Khan"
4 T60 27" lab15,Omni TB 2 BP102,AutoTubaMCM 10"
Re: 36" THT Low Profile, Warning lots of coffin pictures
Thanks!
Post subject: Re: 36" THT Low Profile, Warning lots of coffin pictures Reply with quote
Good job. You sure smoothed it out. Some times you may find that an RCA crossover like Harrison
Labs 100 Hz or 140 Hz low pass filter x2 will take out some flappyness. If the horn is doing overtime by working above 150hz that would be noticeable front corner or wherever you permanently installed it. You don't want to be able to pinpoint where the sub bass is coming from.
Awesome build !
I use the lowpass filter from my inuke, it´s really an overkill amp for this but it´s some future proofing if i want to go multiples
-
- Posts: 10
- Joined: Thu Nov 23, 2023 12:57 am
Re: 36" THT Low Profile, Warning lots of coffin pictures
Is anyone else having problems with the photographs in this post appearing?
'85 LaScalas
VTA ST-70 tube amp
Bluesound Node 2i
TubaHT LP, 36" width
18" Ultimax, sealed
VTA ST-70 tube amp
Bluesound Node 2i
TubaHT LP, 36" width
18" Ultimax, sealed
- Bill Fitzmaurice
- Site Admin
- Posts: 28620
- Joined: Tue May 02, 2006 5:59 pm
Re: 36" THT Low Profile, Warning lots of coffin pictures
They were on a server location that no longer exists.
-
- Posts: 8301
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: 36" THT Low Profile, Warning lots of coffin pictures
Holy Dead Thread, Batman!
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
Re: 36" THT Low Profile, Warning lots of coffin pictures
Look at the date the post was made. It's a very old thread. It's unfortunate, but a lot of the photos in older threads are missing. They're photos that were not uploaded and hosted on this site, rather the image address was used to show the image here when it's actually hosted and located somewhere else on the web... and for whatever reason, the photo's don't exist at that web address anymore. Photo hosting companies go out of business, people purge and delete old photos, and there's a bunch of other reasons it occurs.DriftlessIA wrote: ↑Sun Dec 10, 2023 10:23 am Is anyone else having problems with the photographs in this post appearing?
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421