OTOP 12 JARRAY PROJECT.

Message

Wed Apr 02, 2014 5:25 pm

cave wrote:Today we continued with installing the hardware and applying acrylic paint as primer so here are some pictures for you.

I can't endorse it of course, but it's being done the right way, with the steel carrying the weight of the array, not the cabinets.

cave · #62 Post by **cave** » Wed Apr 02, 2014 5:35 pm

Thanks Bill. I feel highly motivated when you comment. I was wondering how one could become an authorised builder. I have good woodworking skills and have been thinking of becoming an authorised builder. Please PM me.

Thanks.

Grant Bunter · #63 Post by **Grant Bunter** » Wed Apr 02, 2014 5:44 pm

Hi Cave,
Looking good so far!

Bill may not PM you.

At the bottom of this page:
http://billfitzmaurice.net/Builders.html

you will see the following;
"If you'd like to obtain an authorized builder franchise please email billfitzmaurice@myfairpoint.net"

cave · #64 Post by **cave** » Wed Apr 02, 2014 5:52 pm

Bill Fitzmaurice wrote:I can't endorse it of course, but it's being done the right way, with the steel carrying the weight of the array, not the cabinets.

I have built some arrays with this hardware and they are solid but a bit crude

. Check the pix. BFM has offered me the opportunity to refine it. Thanks.

cave · #65 Post by **cave** » Wed Apr 02, 2014 9:14 pm

Grant Bunter wrote:Hi Cave,
Looking good so far!

Thanks Grant Bunter, I appreciate your support.

cave · #66 Post by **cave** » Thu Apr 03, 2014 7:25 am

We had to modify the back cover. The most important thing here we considered is making it air tight.

Scott Brochu · #67 Post by **Scott Brochu** » Thu Apr 03, 2014 3:35 pm

Lot of weight but I like the looks. We all ready know it'll sound great.

cave · #68 Post by **cave** » Sat Apr 05, 2014 5:25 pm

Scott Brochu wrote:Lot of weight but I like the looks. We all ready know it'll sound great.

There should be between 5.t to 6 lb additional weight added to the overall weight of the cabs.
I'm using the Delta Pro 12A and RCF N350 compression drivers for the cabs. These I know is heavier than the neo and piezos but the hardware makes it safe to carry. Even if it goes up to 50lbs, I believe it will still be lower in weight compered to the competition.. KF730 is about 77lbs

cave · #69 Post by **cave** » Sun Apr 06, 2014 6:53 am

Grant Bunter wrote:Hi Cave,
Looking good so far!

Bill may not PM you."

Hey Grant Bunter,
Thanks for you help. Bill actually did PM me. I must say this forum unlike others is a real serious platform. Thanks Bill.

cave · #70 Post by **cave** » Mon Apr 07, 2014 4:12 pm

Folks we are gradually getting to the finish line. Today we installed the drivers and lined the cabs with foam. Before then, we finished fitting one cab and player music through to inspire us as we worked. Without any equalization, the music already sounded clean and crispy. Every detail came through clearly. I just cant wait to llisten to the full array. we will finish with all the connections ane back covers ill post some pix soon.

cave · #71 Post by **cave** » Tue Apr 08, 2014 7:04 pm

We continue from yesterday. i'll post some pix.

cave · #72 Post by **cave** » Sun Apr 13, 2014 1:09 pm

We ordered 3buckets of roller grade and 2buckets of spray grade duratex paint from acrytech in the US. We hope to take delivery by the end of this week. (shipping and clearing) Hopefully we will complete the cabs by next weekend. Guess what, There's a gig on standby for the cabs already.

cave · #73 Post by **cave** » Mon Jul 28, 2014 6:18 pm

Hi lovely people, after almost four months of absence I am back to tell you we have a really good looking set of cabs ready for a major out door program.

Grant Bunter · #74 Post by **Grant Bunter** » Mon Jul 28, 2014 7:07 pm

cave wrote:Hi lovely people, after almost four months of absence I am back to tell you we have a really good looking set of cabs ready for a major out door program.

67baja · #75 Post by **67baja** » Mon Jul 28, 2014 10:00 pm

You do realize we expect a full review and video, RIGHT? Great job on the builds

BillFitzmaurice.info

OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.

Re: OTOP 12 JARRAY PROJECT.