OTOP 12 JARRAY PROJECT.
Re: OTOP 12 JARRAY PROJECT.
Hi Charles, I flew the cabs today. I haven't taken pictures yet but ill do so tomorrow and post them. As for the stress calculations, I haven't done any yet but have compared my design with the tassos I used in the pix and mine are as solid as theirs. Id say my design is an over kill for the Otops 12s because those cabs are not so heavy.
Built 2 x DR 250
Building 8 DR 250
Built 8 x OTOP 12 JARRAY
Built 2 TITAN 48
48ch & 32ch Sofware Audio Console
http://billfitzmaurice.info/forum/viewt ... 30&t=21253
http://billfitzmaurice.info/forum/viewt ... 13&t=22092
Building 8 DR 250
Built 8 x OTOP 12 JARRAY
Built 2 TITAN 48
48ch & 32ch Sofware Audio Console
http://billfitzmaurice.info/forum/viewt ... 30&t=21253
http://billfitzmaurice.info/forum/viewt ... 13&t=22092
Re: OTOP 12 JARRAY PROJECT.
Here are some pictures of the flown Otop 12 Jarrays
Built 2 x DR 250
Building 8 DR 250
Built 8 x OTOP 12 JARRAY
Built 2 TITAN 48
48ch & 32ch Sofware Audio Console
http://billfitzmaurice.info/forum/viewt ... 30&t=21253
http://billfitzmaurice.info/forum/viewt ... 13&t=22092
Building 8 DR 250
Built 8 x OTOP 12 JARRAY
Built 2 TITAN 48
48ch & 32ch Sofware Audio Console
http://billfitzmaurice.info/forum/viewt ... 30&t=21253
http://billfitzmaurice.info/forum/viewt ... 13&t=22092
- jswingchun
- Posts: 1073
- Joined: Fri Dec 01, 2006 9:43 am
- Location: Cedar Rapids, Iowa
- Contact:
Re: OTOP 12 JARRAY PROJECT.
That is so cool!
Omni 10
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)
Re: OTOP 12 JARRAY PROJECT.
Could you get a picture of your rig that is lifting the speakers? I see what looks like a square frame, but I am curious as to how it allows for angling up where the hoist hooks on.
Btw this system looks awesome. I am working on getting my Otops made so I can have a complete system finally.
Btw this system looks awesome. I am working on getting my Otops made so I can have a complete system finally.
Re: OTOP 12 JARRAY PROJECT.
Those pics are inspiring. But, the OTops, are heavy enough to kill someone. Explain your rigging in detail because, in my church, this is a question that must be addressed.cave wrote:those cabs are not so heavy.
2X OTop 112, 3012HO, melded - 2X T39, 27", Lab 12 - XF 212 - 4 DR250, 2 melded, 2 straight
2 20" T39 3012LF - WH10 - WH8 - in the shop - 2 more 20" T39s
http://saltandlighteureka.org still need a trailer
2 20" T39 3012LF - WH10 - WH8 - in the shop - 2 more 20" T39s
http://saltandlighteureka.org still need a trailer
Re: OTOP 12 JARRAY PROJECT.
I plan to have 4 Omnitop J-arrays a side. No higher than 8 feet. Outdoor rig will be encased in scaffolding. Thinking it'd be nice to just get them up off the ground if possible.
Re: OTOP 12 JARRAY PROJECT.
The cabs looks heavy but they are about a quarter or even less than what the same rig carries. I will post drawings soon. thanks
Built 2 x DR 250
Building 8 DR 250
Built 8 x OTOP 12 JARRAY
Built 2 TITAN 48
48ch & 32ch Sofware Audio Console
http://billfitzmaurice.info/forum/viewt ... 30&t=21253
http://billfitzmaurice.info/forum/viewt ... 13&t=22092
Building 8 DR 250
Built 8 x OTOP 12 JARRAY
Built 2 TITAN 48
48ch & 32ch Sofware Audio Console
http://billfitzmaurice.info/forum/viewt ... 30&t=21253
http://billfitzmaurice.info/forum/viewt ... 13&t=22092
Re: OTOP 12 JARRAY PROJECT.
Yes please post drawings.cave wrote:The cabs looks heavy but they are about a quarter or even less than what the same rig carries. I will post drawings soon. thanks
We are making a flying array in the following thread and would benefit from your design and build experience!
http://billfitzmaurice.info/forum/viewt ... =2&t=23132
Newest mix https://facebook.com/BEATJACKERmusic "Like" appreciated
Re: OTOP 12 JARRAY PROJECT.
Do you have any tips for bending the wood? I am having serious trouble doing so.
Built:
4x Titan48, 18" wide loaded with Kappalite 3015LF
Bought:
2x DR250 w/ deltalite 2510 II
Building:
8x Omnitop 12 J-array w/ Delta Pro 12A and Melded/flat tweeter arrays
4x Titan48 18" wide w/ Kappalite 3015LF
4x Titan48, 18" wide loaded with Kappalite 3015LF
Bought:
2x DR250 w/ deltalite 2510 II
Building:
8x Omnitop 12 J-array w/ Delta Pro 12A and Melded/flat tweeter arrays
4x Titan48 18" wide w/ Kappalite 3015LF