Thinking of building an XF212 in the style of a Vox AC30, 27.5 x 20.25x 10.375 inches. Anyone tried it? It would be tight!
It would be more than tight me thinks. 10 3/8" deep would allow a maximum driver depth of roughly 1 1/2". I'm pretty sure that would make the cab a no goer.
You'd also be adding nearly 4" in cab height, meaning the top of the cab (that you sit your amp on) would have to be smaller, maybe to small.
Adding an extra 1/2" in width means having to work out the measurement to extend the baffles. Or some other method to address the deficit.
Sure, it's DIY, but stick with the plans if you want to build an XF212.
If you do, it will work...
2 x DR 250 (melded array) with March 2012 plans.
4 x 20" BP102 T39's, 2 x 28" 3012lf loaded underway.
3 x WH8 with melded array.Bunter's Audio and Lighting
"like"s would be most appreciated...