It is currently Sun Nov 19, 2017 11:09 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 8 posts ] 
Author Message
 Post subject: More mids?
PostPosted: Mon Jul 17, 2017 9:37 am 
Offline
User avatar

Joined: Tue Oct 04, 2016 3:51 pm
Posts: 121
Is there anyway to get more mids out of dr280s? I have 4 in total stacked 2 of them have 3012ho woofers all with melded array. And I feel like the mids are lacking. I don't get much air out of the port holes and the louder I go only makes the highs ear shattering. I even turned it down to 16khz to get rid of some of the extreme highs. I run 4 off a gx5.

_________________
10x Tuba 60 - Dual 12" LAB
5x DR280 - Melded 22 piezo array
2x Crest Audio 5.0
1x Peavey IPR2 3000

https://ibb.co/e0Uazv
https://ibb.co/bUxmJQ

Klarity Audio & Lighting
https://www.facebook.com/KlarityAudio/


Top
   
 Post subject: Re: More mids?
PostPosted: Mon Jul 17, 2017 10:17 am 
Offline

Joined: Fri Nov 27, 2009 11:37 am
Posts: 6092
Location: New Braunfels, TX
DJStubbs wrote:
Is there anyway to get more mids out of dr280s? I have 4 in total stacked 2 of them have 3012ho woofers all with melded array. And I feel like the mids are lacking. I don't get much air out of the port holes and the louder I go only makes the highs ear shattering. I even turned it down to 16khz to get rid of some of the extreme highs. I run 4 off a gx5.



The problem is everyone has a different interpretation of what "mids" are. If you can't find the resolution of the problem with a third octave EQ, then you may try the CD horn.

If you are talking about the area in the 1-2k range, I know that I hear a warmer sound out of the CDs than I do with the melded array. But, that's with the NSD2005s that are crossed at 1.2k. I don't think you'd get much by trying the ASD1001 as they are pretty much crossed in the same place as the melded array.

Certainly, I'd examine the EQ before tearing up the cabs.

Now, if you are talking about mids as being down in the 300-600hz range, then that's strictly an EQ issue.

_________________

6 - T39 4-25" 2-22" 3012LF
4 - OT12 2512 Melded/NSD2005
1 - T24
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."


Top
   
 Post subject: Re: More mids?
PostPosted: Mon Jul 17, 2017 10:20 am 
Offline
User avatar

Joined: Tue Jul 29, 2008 12:56 pm
Posts: 1866
Location: Tucson, AZ
Bruce beat me to it, but in short:
What are you using to EQ the system?
What's your resultant curve look like?
What type of filter and set point are you using for their high-pass?

_________________
Good food, good people, good times.


Top
   
 Post subject: Re: More mids?
PostPosted: Mon Jul 17, 2017 1:08 pm 
Offline
User avatar

Joined: Tue Oct 04, 2016 3:51 pm
Posts: 121
I have the tops set at 80-16khz
And I run them LR48 no other settings changed. I use a dbx driverack pa2.
And yes I mean the 200hz and above

_________________
10x Tuba 60 - Dual 12" LAB
5x DR280 - Melded 22 piezo array
2x Crest Audio 5.0
1x Peavey IPR2 3000

https://ibb.co/e0Uazv
https://ibb.co/bUxmJQ

Klarity Audio & Lighting
https://www.facebook.com/KlarityAudio/


Top
   
 Post subject: Re: More mids?
PostPosted: Mon Jul 17, 2017 9:30 pm 
Offline

Joined: Wed Jul 30, 2008 10:18 am
Posts: 579
Location: Kankakee, IL
200-600 hz? 200-16,000 hz?

"And above" isn't very specific.

_________________
2 DR250s, 2 27" Lab15 T-60s, 2 30" Neo Titan 39s, 1 Autotuba...and looking for more!


Top
   
 Post subject: Re: More mids?
PostPosted: Mon Jul 17, 2017 11:55 pm 
Offline

Joined: Wed Mar 25, 2009 7:07 pm
Posts: 1291
Location: Medicine Hat, Alberta, Canada
Play a 100hz tone on one of them then plug in another one and makes sure it gets louder. Do that for all of them.

_________________
Built:
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience


Top
   
 Post subject: Re: More mids?
PostPosted: Tue Jul 18, 2017 12:42 am 
Offline
User avatar

Joined: Tue Oct 04, 2016 3:51 pm
Posts: 121
Rich4349 wrote:
200-600 hz? 200-16,000 hz?

"And above" isn't very specific.


Sorry i meant to answer a question yes i mean 200-600hz and my crossover is set up 80hz-16khz for my dr280s i want to louden up my mid section. but by doing that i am turning up the highs too.
And Ill try and run a test tone and see if it gets louder.

_________________
10x Tuba 60 - Dual 12" LAB
5x DR280 - Melded 22 piezo array
2x Crest Audio 5.0
1x Peavey IPR2 3000

https://ibb.co/e0Uazv
https://ibb.co/bUxmJQ

Klarity Audio & Lighting
https://www.facebook.com/KlarityAudio/


Top
   
 Post subject: Re: More mids?
PostPosted: Tue Jul 18, 2017 6:50 am 
Offline
Site Admin
User avatar

Joined: Tue May 02, 2006 5:59 pm
Posts: 25667
DJStubbs wrote:
i want to louden up my mid section. but by doing that i am turning up the highs too.
If that's the case you're doing it the wrong way. If you want more output from 200-600Hz you increase the EQ from 200-600Hz.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
banner
Powered by phpBB® Forum Software © phpBB Limited