My T39's get more sensitive around 100Hz and I want them fairly flat. So, rather than boosting the lower end, I EQ down at the top end. The problem comes with the DR's. They aren't very strong at 100Hz but I pull EQ before the crossover so it makes my 100Hz on the DR200s very, very weak - compromising the crossover point. I can move the crossover point up but then I am mid band on the EQ.
- Do I get another EQ for the subs and pull down afterward the crossover
- EQ up below 80Hz?
- Leave the EQ at 100Hz and move the crossover frequency lower on the subs and decrease the slope to LR12?
- Just live with it?