Simplexx 10 Monitor

Post your reviews and pictures here.
Post Reply
Message
Author
User avatar
LelandCrooks
Posts: 7244
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Simplexx 10 Monitor

#1 Post by LelandCrooks »

Nicely done Bill. Easy to construct, nice extension from the beta10cx, and your xover does a fine job of taming the Eminence peaks. This is a very good monitor.
Attachments
LMH_3335 Compress.JPG
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

Jeffrey731
Posts: 1
Joined: Fri Oct 07, 2016 2:54 pm

Re: Simplexx 10 Monitor

#2 Post by Jeffrey731 »

Looks good. I think I'm going to build 4 of these.

User avatar
LelandCrooks
Posts: 7244
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Simplexx 10 Monitor

#3 Post by LelandCrooks »

They won't disappoint.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

User avatar
Charles Jenkinson
Posts: 1125
Joined: Sat Aug 06, 2011 3:25 pm
Location: Manchester, UK

Re: Simplexx 10 Monitor

#4 Post by Charles Jenkinson »

I know we've done grills to death elsewhere, but that looks mighty tidy. Are those grill fasteners and stand-offs a Penn Elcom part? I'm thinking they might work better for wedgehorns than the previously referred blind clamping strip methods (that I think Jools from London used), particularly with the inner horn taper getting in the way. Though some sort of return / fold on the mesh edge is needed for rigidity, but it's got be slightly over 90 degrees for a WH.
2xJ12L (3012HO) switchable/melded
2xT30

Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.

User avatar
LelandCrooks
Posts: 7244
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Simplexx 10 Monitor

#5 Post by LelandCrooks »

7/8" return bend on the grille. 1" rubber feet underneath. Screws and caps.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

Post Reply