8 T36 stacked & Plated
8 T36 stacked & Plated
Had a chance to step back and take some pictures of the T36.
We were going to floor stack but for safety and attendance issues we moved them onto stage.
We were about 2ft off the floor and 2 ft from the ceiling.
8 Tuba36
2 Crown XTI 2000
we used the house sound side fill Jbls as OmniTop12 stands
2x2512 Melded
2xHO Melded
2xCompression Horn
2 x Crown XTI 1000
We were going to floor stack but for safety and attendance issues we moved them onto stage.
We were about 2ft off the floor and 2 ft from the ceiling.
8 Tuba36
2 Crown XTI 2000
we used the house sound side fill Jbls as OmniTop12 stands
2x2512 Melded
2xHO Melded
2xCompression Horn
2 x Crown XTI 1000
Built
8 - Tuba36:24 wide 3015lf
4 - OmniTop12: Melded: DeltaliteII
Bought
4 -OmniTop12: Melded: DeltaliteII
2 -OmniTOp12: Compression
3 -W10
http://www.gtrpro.com
http://www.gtrpro.com/newsite1
https://www.facebook.com/GoldenTriangleProductions
8 - Tuba36:24 wide 3015lf
4 - OmniTop12: Melded: DeltaliteII
Bought
4 -OmniTop12: Melded: DeltaliteII
2 -OmniTOp12: Compression
3 -W10
http://www.gtrpro.com
http://www.gtrpro.com/newsite1
https://www.facebook.com/GoldenTriangleProductions
Re: 8 T36 stacked & Plated
My close friend brought his compact 19 inch x32 mixer and EQ the room.
The x32 fixed some glaring balance issues.
cleaned up the eq and solved some problems at 350 hz.
The power alley was about 18 ft wide (I mean 12 ft wide) and 25 ft deep into the crowd.
there was a null at about 30 ft. (I noticed ceiling tiles were missing there?)
Then it was okay after 35 ft.
I think the ceiling is 12 ft tall.
The cook stated "you shook the dishes all night" with a smile.
The x32 fixed some glaring balance issues.
cleaned up the eq and solved some problems at 350 hz.
The power alley was about 18 ft wide (I mean 12 ft wide) and 25 ft deep into the crowd.
there was a null at about 30 ft. (I noticed ceiling tiles were missing there?)
Then it was okay after 35 ft.
I think the ceiling is 12 ft tall.
The cook stated "you shook the dishes all night" with a smile.
Last edited by gtr_pro on Sat Sep 12, 2015 10:51 am, edited 1 time in total.
Built
8 - Tuba36:24 wide 3015lf
4 - OmniTop12: Melded: DeltaliteII
Bought
4 -OmniTop12: Melded: DeltaliteII
2 -OmniTOp12: Compression
3 -W10
http://www.gtrpro.com
http://www.gtrpro.com/newsite1
https://www.facebook.com/GoldenTriangleProductions
8 - Tuba36:24 wide 3015lf
4 - OmniTop12: Melded: DeltaliteII
Bought
4 -OmniTop12: Melded: DeltaliteII
2 -OmniTOp12: Compression
3 -W10
http://www.gtrpro.com
http://www.gtrpro.com/newsite1
https://www.facebook.com/GoldenTriangleProductions
Re: 8 T36 stacked & Plated
Dalton ran the Laser show from stage left, he is over 6 ft tall and stout.
I ran lights next to him and Dj was on stage right.
I ran lights next to him and Dj was on stage right.
Built
8 - Tuba36:24 wide 3015lf
4 - OmniTop12: Melded: DeltaliteII
Bought
4 -OmniTop12: Melded: DeltaliteII
2 -OmniTOp12: Compression
3 -W10
http://www.gtrpro.com
http://www.gtrpro.com/newsite1
https://www.facebook.com/GoldenTriangleProductions
8 - Tuba36:24 wide 3015lf
4 - OmniTop12: Melded: DeltaliteII
Bought
4 -OmniTop12: Melded: DeltaliteII
2 -OmniTOp12: Compression
3 -W10
http://www.gtrpro.com
http://www.gtrpro.com/newsite1
https://www.facebook.com/GoldenTriangleProductions
- Chris_Allen
- Posts: 3355
- Joined: Wed Jul 11, 2007 2:43 pm
- Location: Huddersfield, UK
Re: 8 T36 stacked & Plated
With that many T36's, do you really need a VPlate?!?
I may have been tempted to just have them in a line or do you start getting interference if the sub array is too wide?
Either way, looks nice! really nice!
I may have been tempted to just have them in a line or do you start getting interference if the sub array is too wide?
Either way, looks nice! really nice!
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: 8 T36 stacked & Plated
Actually, no. Returns diminish as more cabs are added. With eight just the V coupling is adequate, the plate doesn't add any more to it.Chris_Allen wrote:With that many T36's, do you really need a VPlate?!?
-
- Posts: 8322
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: 8 T36 stacked & Plated
At what height do you lose any advantage? My stack of T39s is right at 6 feet tall. Haven't every v-plated that configuration, but wonder if it's worth it should I ever have the opportunity.Bill Fitzmaurice wrote:Actually, no. Returns diminish as more cabs are added. With eight just the V coupling is adequate, the plate doesn't add any more to it.Chris_Allen wrote:With that many T36's, do you really need a VPlate?!?
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
Re: 8 T36 stacked & Plated
thanks for the info!Bill Fitzmaurice wrote:Actually, no. Returns diminish as more cabs are added. With eight just the V coupling is adequate, the plate doesn't add any more to it.Chris_Allen wrote:With that many T36's, do you really need a VPlate?!?
Putting that V Plate on is tough, Ladder!
Built
8 - Tuba36:24 wide 3015lf
4 - OmniTop12: Melded: DeltaliteII
Bought
4 -OmniTop12: Melded: DeltaliteII
2 -OmniTOp12: Compression
3 -W10
http://www.gtrpro.com
http://www.gtrpro.com/newsite1
https://www.facebook.com/GoldenTriangleProductions
8 - Tuba36:24 wide 3015lf
4 - OmniTop12: Melded: DeltaliteII
Bought
4 -OmniTop12: Melded: DeltaliteII
2 -OmniTOp12: Compression
3 -W10
http://www.gtrpro.com
http://www.gtrpro.com/newsite1
https://www.facebook.com/GoldenTriangleProductions
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: 8 T36 stacked & Plated
I wouldn't bother with the plate past 3 cabs high.
Re: 8 T36 stacked & Plated
We do all 8 in a line a few times (2 times a year) , and stacking them is rare ( 1 time in 2 years?)Chris_Allen wrote:With that many T36's, do you really need a VPlate?!?
I may have been tempted to just have them in a line or do you start getting interference if the sub array is too wide?
Either way, looks nice! really nice!
When we do all 8 in a line we use it as a DJ booth.
However we learned that you have to use 180 lb stage decks to keep the laptops and contollers from wobbling off the tubas/Dj booth.
the 8x4 piece of MDF on 2x4 could not handle the rumble.
Built
8 - Tuba36:24 wide 3015lf
4 - OmniTop12: Melded: DeltaliteII
Bought
4 -OmniTop12: Melded: DeltaliteII
2 -OmniTOp12: Compression
3 -W10
http://www.gtrpro.com
http://www.gtrpro.com/newsite1
https://www.facebook.com/GoldenTriangleProductions
8 - Tuba36:24 wide 3015lf
4 - OmniTop12: Melded: DeltaliteII
Bought
4 -OmniTop12: Melded: DeltaliteII
2 -OmniTOp12: Compression
3 -W10
http://www.gtrpro.com
http://www.gtrpro.com/newsite1
https://www.facebook.com/GoldenTriangleProductions
Re: 8 T36 stacked & Plated
thanks for the positive words, I wish I could of cleaned out the horn path more... dust...Chris_Allen wrote:With that many T36's, do you really need a VPlate?!?
I may have been tempted to just have them in a line or do you start getting interference if the sub array is too wide?
Either way, looks nice! really nice!
Built
8 - Tuba36:24 wide 3015lf
4 - OmniTop12: Melded: DeltaliteII
Bought
4 -OmniTop12: Melded: DeltaliteII
2 -OmniTOp12: Compression
3 -W10
http://www.gtrpro.com
http://www.gtrpro.com/newsite1
https://www.facebook.com/GoldenTriangleProductions
8 - Tuba36:24 wide 3015lf
4 - OmniTop12: Melded: DeltaliteII
Bought
4 -OmniTop12: Melded: DeltaliteII
2 -OmniTOp12: Compression
3 -W10
http://www.gtrpro.com
http://www.gtrpro.com/newsite1
https://www.facebook.com/GoldenTriangleProductions
Re: 8 T36 stacked & Plated
Well done!
Regardless of width? Or is it a "total height" thing.Bill Fitzmaurice wrote:I wouldn't bother with the plate past 3 cabs high.
TomS
-
- Posts: 461
- Joined: Sun Feb 16, 2014 7:19 pm
- Location: Perth, Western Australia
Re: 8 T36 stacked & Plated
Edit - read thread.
Nice stack btw gtr_pro Bet they shook the place!
Nice stack btw gtr_pro Bet they shook the place!
Built:
6 T30 (24", 3012LF)
2 OT12 (MA, 3012HO)
2 T24 (18", 3010LF)
Running:
DCX2496
XTi 2002
XTi 4002
TRAKTOR Z2
TECHNICS 1210 Mk5's
6 T30 (24", 3012LF)
2 OT12 (MA, 3012HO)
2 T24 (18", 3010LF)
Running:
DCX2496
XTi 2002
XTi 4002
TRAKTOR Z2
TECHNICS 1210 Mk5's