OT12 and T48 combination
Re: OT12 and T48 combination
He's got photos of the rack on facebook and it's genuinely hilarious how tiny it is to run all that kit.
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"
Re: OT12 and T48 combination
hi there pulseman is there any chance you could post a photo of your deq settings for your main stacks and also what procedure you use for setting eq at your various gigs....regards..Frank leamyPulseMan wrote:Hi BoydBoyd wrote:'m curious about your design considerations for choosing the SLA-Pro as centre fill, compared to say, another Otop12 melded?
How does the SLA-Pro compare tonally to the Otop 12, and do you find you need to EQ it differently?
Thanks for the kind words .
Regarding your centre fill question, most people would recommend the OT12. I tried both and due to most of the shows I do, the crowds stand right up against the stage ramps and with the T48's under the stage, I found the SLA-Pro worked better (overall the system felt fuller and tighter to my ears being that close up to the cabs). When I built the SLA I added an extra section to the back of the box and added a plate amp to it, it has a HPF of 100hz built in too. I run it off a separate output on my DCX crossover and also through one of my DEQ's to fine tune the EQ a bit. Strangely enough the SLA's RTA EQ is pretty flat but when I tried the OT12 as centre fill it's RTA graph was all over the place.
PulseMan
Re: OT12 and T48 combination
Hi all
Three years now that I'm using this BFM setup and all is still "Super Duper".
Every year I keep getting the same contracts over and over and more.
Anybody still indecisive about building a BFM rig, DO IT you won't be sorry.
Once again thanks to Bill for his designs and to all the forum members who have contributed with advice and +1's over the years.
God Bless
Jose
Three years now that I'm using this BFM setup and all is still "Super Duper".
Every year I keep getting the same contracts over and over and more.
Anybody still indecisive about building a BFM rig, DO IT you won't be sorry.
Once again thanks to Bill for his designs and to all the forum members who have contributed with advice and +1's over the years.
God Bless
Jose
BUILT
6 OT12's DELTA PRO 12A STRAIGHT ARRAY
2 OT12's DELTA PRO 12A MELDED ARRAY
8 T48's 24" 3015LF LOADED
2 WEDGEHORN 10 MKIV's
1 SLA PRO FOR CENTRE FILL
Like us on facebook
https://www.facebook.com/Pulse.Entertainment.SA
6 OT12's DELTA PRO 12A STRAIGHT ARRAY
2 OT12's DELTA PRO 12A MELDED ARRAY
8 T48's 24" 3015LF LOADED
2 WEDGEHORN 10 MKIV's
1 SLA PRO FOR CENTRE FILL
Like us on facebook
https://www.facebook.com/Pulse.Entertainment.SA
Re: OT12 and T48 combination
Hi guys, I am currently building a rig just like Pulseman's and I must say I'm really encouraged. I had to suspend building 8 DR250s which I'll continue after finishing the OTops 12 jarrays. Thanks Pulseman you are a worthy ambassador.
Built 2 x DR 250
Building 8 DR 250
Built 8 x OTOP 12 JARRAY
Built 2 TITAN 48
48ch & 32ch Sofware Audio Console
http://billfitzmaurice.info/forum/viewt ... 30&t=21253
http://billfitzmaurice.info/forum/viewt ... 13&t=22092
Building 8 DR 250
Built 8 x OTOP 12 JARRAY
Built 2 TITAN 48
48ch & 32ch Sofware Audio Console
http://billfitzmaurice.info/forum/viewt ... 30&t=21253
http://billfitzmaurice.info/forum/viewt ... 13&t=22092
-
- Posts: 8
- Joined: Wed May 30, 2012 2:49 am
- Location: Portugal
Re: OT12 and T48 combination
Hey PulseMan
Long time, you've been quiet lately, hows things going with you and your setup?
Really miss your posts and pictures, as BFM rigs are almost non existent here in Portugal and Spain areas .
I really look for inspiration from you as I have a similar combination as you just less cabs
Regards
LostEnigma
Long time, you've been quiet lately, hows things going with you and your setup?
Really miss your posts and pictures, as BFM rigs are almost non existent here in Portugal and Spain areas .
I really look for inspiration from you as I have a similar combination as you just less cabs
Regards
LostEnigma
2 OT12's
2 T48's
2 T48's
Re: OT12 and T48 combination
Hi all
Just finished another successful tour of festivals here in South Africa.
BFM rig performed flawlessly as usual.
Regards
PulseMan
Just finished another successful tour of festivals here in South Africa.
BFM rig performed flawlessly as usual.
Regards
PulseMan
BUILT
6 OT12's DELTA PRO 12A STRAIGHT ARRAY
2 OT12's DELTA PRO 12A MELDED ARRAY
8 T48's 24" 3015LF LOADED
2 WEDGEHORN 10 MKIV's
1 SLA PRO FOR CENTRE FILL
Like us on facebook
https://www.facebook.com/Pulse.Entertainment.SA
6 OT12's DELTA PRO 12A STRAIGHT ARRAY
2 OT12's DELTA PRO 12A MELDED ARRAY
8 T48's 24" 3015LF LOADED
2 WEDGEHORN 10 MKIV's
1 SLA PRO FOR CENTRE FILL
Like us on facebook
https://www.facebook.com/Pulse.Entertainment.SA
Re: OT12 and T48 combination
Who cares about the kit? We want closeups88h88 wrote:He's got photos of the rack on facebook and it's genuinely hilarious how tiny it is to run all that kit.
2X OTop 112, 3012HO, melded - 2X T39, 27", Lab 12 - XF 212 - 4 DR250, 2 melded, 2 straight
2 20" T39 3012LF - WH10 - WH8 - in the shop - 2 more 20" T39s
http://saltandlighteureka.org still need a trailer
2 20" T39 3012LF - WH10 - WH8 - in the shop - 2 more 20" T39s
http://saltandlighteureka.org still need a trailer
- Chris_Allen
- Posts: 3355
- Joined: Wed Jul 11, 2007 2:43 pm
- Location: Huddersfield, UK
Re: OT12 and T48 combination
Good job PulseMan.
I think you've had enough fun, it's time to make your rig bigger!
I think you've had enough fun, it's time to make your rig bigger!
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
Re: OT12 and T48 combination
Chris_Allen wrote:Good job PulseMan.
I think you've had enough fun, it's time to make your rig bigger!
LOL, don't want to steal the big company's work away from them, do we now?
PulseMan
BUILT
6 OT12's DELTA PRO 12A STRAIGHT ARRAY
2 OT12's DELTA PRO 12A MELDED ARRAY
8 T48's 24" 3015LF LOADED
2 WEDGEHORN 10 MKIV's
1 SLA PRO FOR CENTRE FILL
Like us on facebook
https://www.facebook.com/Pulse.Entertainment.SA
6 OT12's DELTA PRO 12A STRAIGHT ARRAY
2 OT12's DELTA PRO 12A MELDED ARRAY
8 T48's 24" 3015LF LOADED
2 WEDGEHORN 10 MKIV's
1 SLA PRO FOR CENTRE FILL
Like us on facebook
https://www.facebook.com/Pulse.Entertainment.SA
- allroundFX
- Posts: 34
- Joined: Mon Oct 13, 2014 3:47 am
- Location: Netherlands
Re: OT12 and T48 combination
Do you still use the Synq amps?
Cause we had some trouble with them resulting in 6 blown drivers before we figured out it was the synq. It was hard to find cause the drivers blown all on the last hourof a gig of 10 or 16 hours. But during the last one I was monitoring the outputs with my engineer and all of a sudden without any indication or reason it went into clip and protection and blammo Silence from the subs. it was a real big WTF? moment. Never touched them again, and no more blown sub drivers.
Cause we had some trouble with them resulting in 6 blown drivers before we figured out it was the synq. It was hard to find cause the drivers blown all on the last hourof a gig of 10 or 16 hours. But during the last one I was monitoring the outputs with my engineer and all of a sudden without any indication or reason it went into clip and protection and blammo Silence from the subs. it was a real big WTF? moment. Never touched them again, and no more blown sub drivers.
Famous BFM quotes: "Zobels are for those who don't know how to design crossovers"
Re: OT12 and T48 combination
allroundFX wrote:Do you still use the Synq amps?
Cause we had some trouble with them resulting in 6 blown drivers before we figured out it was the synq. It was hard to find cause the drivers blown all on the last hourof a gig of 10 or 16 hours. But during the last one I was monitoring the outputs with my engineer and all of a sudden without any indication or reason it went into clip and protection and blammo Silence from the subs. it was a real big WTF? moment. Never touched them again, and no more blown sub drivers.
Hi sorry for late reply, pretty busy at the moment.
Anyway, yes still use them and no issues thus far.
I know the very first batch of 3K6's had a module issue which they did rectify some time back.
Touch wood mine are stable and have worked pretty hard.
Last edited by PulseMan on Sun Mar 15, 2015 7:32 am, edited 1 time in total.
BUILT
6 OT12's DELTA PRO 12A STRAIGHT ARRAY
2 OT12's DELTA PRO 12A MELDED ARRAY
8 T48's 24" 3015LF LOADED
2 WEDGEHORN 10 MKIV's
1 SLA PRO FOR CENTRE FILL
Like us on facebook
https://www.facebook.com/Pulse.Entertainment.SA
6 OT12's DELTA PRO 12A STRAIGHT ARRAY
2 OT12's DELTA PRO 12A MELDED ARRAY
8 T48's 24" 3015LF LOADED
2 WEDGEHORN 10 MKIV's
1 SLA PRO FOR CENTRE FILL
Like us on facebook
https://www.facebook.com/Pulse.Entertainment.SA
-
- Posts: 71
- Joined: Tue Apr 01, 2014 9:36 am
- Location: Nieuw Amsterdam/Netherlands
Re: OT12 and T48 combination
A question about your synq amps.
Normaly the 'clip' led will light when the amp is clipping, only that is not the case with these amps is it?
If I run some subs on my 2k2 amp at a certain volume the clip led will light, only not the clip limiter light.
So the amp isn't clipping am I correct?
Do these clip lights light up when you're pushing them?
Normaly the 'clip' led will light when the amp is clipping, only that is not the case with these amps is it?
If I run some subs on my 2k2 amp at a certain volume the clip led will light, only not the clip limiter light.
So the amp isn't clipping am I correct?
Do these clip lights light up when you're pushing them?
Build:
2x Jack 15 3015/ASD1001
2x Titan 48 3015LF 36''
Building:
4x Wedgehorn 8
2x Titan 48 3015LF 36''
8x Otop J-array cabs
2x Jack 15 3015/ASD1001
2x Titan 48 3015LF 36''
Building:
4x Wedgehorn 8
2x Titan 48 3015LF 36''
8x Otop J-array cabs
Re: OT12 and T48 combination
It should be the DCX that is clipping (well, limiting) the signal, not the amps. The amps should never clip (unless the amps are underpowered (or running off a weak power supply)).