It is currently Mon Jun 26, 2017 3:58 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 8 posts ] 
Author Message
 Post subject: SLA pro wedding
PostPosted: Wed Apr 05, 2017 9:36 am 
Offline
User avatar

Joined: Wed Apr 24, 2013 12:43 pm
Posts: 231
Location: Austin, Texas
Wedding at the wildflower center in Austin, Texas last weekend.

Inside setup: One SLA pro (Dayton drivers), one T39-20" with 3012. Outside (through open door) the other SLA.

In summary...it was more than enough. For the dance at the end there was plenty of volume. The indoor space was very reverbarant but the pattern control of the SLA made it totally reasonable once there were some bodies on the floor!


Attachments:
File comment: Outside. Speaker on left. (that wall is the right wall of the interior shot)
missy-wedding-ext.jpg
missy-wedding-ext.jpg [ 49.87 KiB | Viewed 488 times ]
File comment: Inside. Speakers on right.
missy-wedding-int.jpg
missy-wedding-int.jpg [ 38.49 KiB | Viewed 488 times ]

_________________
2xJ15, THT, 4xT39 3012 (2x15", 2x20"), 2xSLA Pro, 2x short SLA Pro (Dayton), W6
Top
   
 Post subject: Re: SLA pro wedding
PostPosted: Wed Apr 05, 2017 9:59 am 
Offline
User avatar

Joined: Sat Jan 05, 2008 1:24 pm
Posts: 6268
Location: Sarnia, Ont. Canada
:clap:

_________________
TomS


Top
   
 Post subject: Re: SLA pro wedding
PostPosted: Wed Apr 05, 2017 10:02 am 
Offline

Joined: Wed Mar 25, 2009 7:07 pm
Posts: 1237
Location: Medicine Hat, Alberta, Canada
:hyper: :hyper:

I bet that flagstone walkway, high heels, and alcohol made for some interesting sights to see.

_________________
Built:
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience


Top
   
 Post subject: Re: SLA pro wedding
PostPosted: Wed Apr 05, 2017 12:20 pm 
Offline
User avatar

Joined: Wed Apr 24, 2013 12:43 pm
Posts: 231
Location: Austin, Texas
CoronaOperator wrote:
:hyper: :hyper:

I bet that flagstone walkway, high heels, and alcohol made for some interesting sights to see.


There was a bit of wobbling on the heel-wearing crowd, yeah! |) We didn't lose any though!

_________________
2xJ15, THT, 4xT39 3012 (2x15", 2x20"), 2xSLA Pro, 2x short SLA Pro (Dayton), W6


Top
   
 Post subject: Re: SLA pro wedding
PostPosted: Wed Apr 05, 2017 2:52 pm 
Offline

Joined: Mon Nov 28, 2011 11:12 am
Posts: 5524
Location: Ilfracombe Queensland Australia
:clap:

_________________
Built:
2 x DR 250 (melded array) with March 2012 plans.
4 x 20" BP102 T39's, 2 x 28" 3012lf loaded underway.
3 x WH8 with melded array.
Bunter's Audio and Lighting "like"s would be most appreciated...


Top
   
 Post subject: Re: SLA pro wedding
PostPosted: Wed Apr 05, 2017 5:52 pm 
Offline
User avatar

Joined: Mon Aug 14, 2006 5:08 am
Posts: 5310
Location: Warren, MI
I'm glad you are happy with how the gig turned out. :clap:

I have to ask: in the 2nd picture, where we can see the SLA, is that you standing underneath and to the right? I ask not to ID you, but to get a feeling as to why your SLA is so high up in the air, only to be pointed at the floor 15-20' in front of it? I would lower the stand, so you are looking straight at the bottom-most driver, and have it pretty much perpendicular to the floor.

_________________
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice


Top
   
 Post subject: Re: SLA pro wedding
PostPosted: Thu Apr 06, 2017 6:06 am 
Offline
User avatar

Joined: Tue Jul 29, 2008 12:56 pm
Posts: 1847
Location: Tucson, AZ
OP, are those K&M Speaker Tilts underneath the SLA Pro?

If so, how do you like them?

_________________
Good food, good people, good times.


Top
   
 Post subject: Re: SLA pro wedding
PostPosted: Mon Apr 10, 2017 3:48 pm 
Offline
User avatar

Joined: Wed Apr 24, 2013 12:43 pm
Posts: 231
Location: Austin, Texas
DJPhatman wrote:
I have to ask: in the 2nd picture, where we can see the SLA, is that you standing underneath and to the right? I ask not to ID you, but to get a feeling as to why your SLA is so high up in the air, only to be pointed at the floor 15-20' in front of it? I would lower the stand, so you are looking straight at the bottom-most driver, and have it pretty much perpendicular to the floor.


That's my partner, who was MC/DJing. I aimed it that way because I was thinking ahead to when we'd be doing the dance and the folks would be up there in front of the lights. For the rest of the evening, yeah, it would have made sense to be less angled.

_________________
2xJ15, THT, 4xT39 3012 (2x15", 2x20"), 2xSLA Pro, 2x short SLA Pro (Dayton), W6


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
banner
Powered by phpBB® Forum Software © phpBB Limited