Bruce Weldy wrote:
Here's a side view of a T39 ..... exactly where would you put a handle like that? It's much easier to roll them than to carry them.
060110 Subs 1.JPG
I like the side-integrated handles in the plan. But it is not an option in case of 3012LF.
I thought it could be useful, because we have to carry our stuff many times on stairs, where casters do not works properly. IMO side handles more comfortable for us.
I wanted to locate the handle as it is described in the plan, when reducers could be used. So in my case, it would hang down to the chamber.
There are smaller handles, like: 6 1/3 x 8 2/3 inches. It would hang down to the chamber ca. 2 1/2 inches (bought side).
I am building 21" wide cab, so I guess there is enough place for them in the chamber - but I did not check it yet. First I wanted to know is it feasible or not.
The other side, if these handles could influence the performance of the cab, than I would not wasting time with that.
Based on the valuable comments here, I am ready to change my direction and use handles as it is on the plan.I learned the rule, if it could be feasible, it would be in the plan.